Tadao Dynasty Ion Board fits (Ion, XE, Epiphany & EOS)

Description

The Tadao Dynasty Ion board is the ultimate aftermarket solution for
your Smart Parts Ion, enabling it to reach the performance level
expected out of top-end tournament markers. The circuit board is the
most important part of any electronic paintball marker, and upgrading
it can potentially change all the performance characteristics. Tadao’s
leading edge Musashi 7 software provides the user with the ultimate in
adjustability and speed.

Features:

• Every
  Tadao Dynasty Ion board comes standard with a full solenoid assembly,
  including high quality hoses, barbs, and seals, and is fully assembled
  and tested. Also included is a grip-panel setting reminder sticker, and
  threaded trigger microswitch washer for use with set-screw based
  triggers such as those made by New Designz. Additional sockets on each
  board support the use of external membrane pads and LEDs for relocating
  the power switch and status LED.
• Includes 12 fire modes:
  • Uncapped semi-auto
  • Capped semi-auto
  • PSP auto-response
  • PSP 50% ramping
  • PSP 100% ramping
  • PSP burst
  • NXL full-automatic
  • Auto-response
  • 50% ramping
  • 100% ramping
  • 3 round burst
  • Full-automatic
• More than 1 billion unique ways to adjust settings
• Asynchronously
  monitors the trigger switch using an interrupt based scan at 2 million
  times per second for the quickest response time and fastest
  semi-automatic
• New two-stage dwell settings allow the user to fine tune power useage for optimum consistency, battery life, and performance
• Rate of fire adjustable from 14 to unlimited bps in 0.25 bps increments
• Adjustable ABS programming eliminates first shot drop-off
• AMB
  (anti-mechanical bounce) and CPF (cycle percentage filter) algorithms
  help to prevent mechanical and switch bounce without missing real
  trigger pulls
• Gangster setting allows 3 different options for every fire mode, giving 36 different “breakout” style modes
• 7
  color LED provides an easy to use programming mode, which allows
  changes to nearly any variable, including debounce, dwell, loader
  delay, anti-mechanical bounce, anti-bolt stick, fire mode, max rate of
  fire, eye mode, cycle percentage filter, Gangster breakout mode, ramp
  start activation, and more
• All settings are stored in non-volatile memory so they are not lost when the battery is disconnected
• Power efficient software and hardware lengthen battery life
• Automatic 15 minute idle power down saves batteries
• One-touch startup enables the marker to fire almost instantly
• Low battery indicator hardware and software shows battery level each time the marker is turned on
• Additional connectors allow external placement of the power switch and status LED
• 80 gram trigger microswitch