New Designz NDZ Spyder Valve

Description

Our new high performance balanced Spyder valve has
great features that sets it apart from any other valve. First, the
shaft is multi-slotted. We’ve added a angled leading edge from the
valves mouth to the exhaust port for super flow. And other features
listed below.

• valve stem has slots on sides, provides uniform airflow to the valve body during firing
• valve stem cup seal is tapered for improved air flow and efficiency
• has replaceable Delrin” valve stem cup seal
• valve
  stem has an undercut section that leads to a 30ﾰ angle which directs
  the air into the exhaust side of the valve during firing
• inlet port has a leading edge that is angled to further enhance airflow
• common increases average around 47fps, however its not uncommon to see 54+fps using this valve.
• With
  such chronograph or FPS increases, the use of lower pressure springs
  will help reduce kick and offer less fatigue and wear on marker
  components
• Markers with inline regulators will be able to significantly reduce the input pressure
• Increases efficiency
  
  

NOTE: The addition of a low tension spring or spring kit may be
necessary to achieve below 300fps operation. As a baseline, markers
with inline regulators should be able to drop input pressures around
100psi