Description
This is a replacement hammer/striker seal for the Spyder/ICON/Gameface/Mayhem markers. This split ring will fit all current Spyder markers, and most older ones except Bob Long Spyders or Spyder SE. This split ring will last much longer than an o-ring and requires no lubrication. To install simply remove old o-ring from hammer and slip new Split Ring over the hammer pressing it into the groove. (Sometimes it helps to roll the hammer like a rolling pin to push the ring into the groove), sanding the inside edge on the “cut” of the ring will allow for best fit, and may be necessary due to manufacturing differences in the striker. You will need 100 grit sandpaper to do this.
Reviews
There are no reviews yet.